Wilsonart® Marker Board Laminate Technical Data 1. Manufacturer Wilsonart International 2400 Wilson Place P.O. Box 6110 Temple, Texas 76503-6110 Phone: (254) 207-7000; (800) 433-3222 Fax: (254) 207-2384 Web Site: www.wilsonartlaminate.com 2. Product Description Recommended Uses: Wilsonart Marker Board Laminate Type 136 is provided for the special needs of applications requiring a durable, gloss decorative surface that ensures easy erasure of dry erase markers or wet erase markers. Wilsonart Marker Board Laminate is ideal for applications where liquid chalk is to be used, including presentation areas, schools, conference rooms, planning centers and offices. Product Composition: Marker Board Laminate is constructed from decorative surface papers that are impregnated with melamine resins and pressed over kraft paper core sheets impregnated with phenolic resin. The melamine resin facilitates liquid chalk removal. Sheets are then bonded at pressures greater than 1000 pounds per square inch and at temperatures approaching 300?F (149?C). Finished sheets are trimmed and the backs sanded to facilitate bonding. Basic Limitations: Wilsonart Marker Board Laminate is for interior use only and is not recommended for direct application to plaster, concrete walls or gypsum wallboard. It is not structural material and must be bonded to a suitable substrate. Do not subject Wilsonart Laminate to extremes in humidity, temperatures over 275?F (135?C) for sustained periods of time, or intense, continuous, direct sunlight. Colors: 1572 Antique White 1573 Frosty White 1595 Black 3”x5” or 8”x10” samples are available for evaluation by calling 1-800-433-3222. Finishes: * #9 Gloss ONLY A smooth, gloss finish that facilitates easy removal of dry erase markers. Glossometer reading: MD and CD 100 ± 10. NOTE: Glossometer readings are made at a 60? angle of incidence. MD means the machine direction of a laminate sheet, and CD refers to the cross direction. Sheet Sizes 48" x 96" (1219.2mm x 2438.4mm) 48” x 144” (1219.2mm x 3657.6mm) Sheet Thicknesses Typical Wilsonart Thickness NEMA Thickness Weight PSF General Purpose Type 136 (HGS) 0.048" ± 0.005" (1.22mm± 0.13mm) 0.048" ± 0.005" (1.2mm± 0.12mm) 0.322# 3. Technical Data Physical Properties of Marker Board Laminate NEMA Test Typical Wilsonart Type 136 Value NEMA Standard* HGS NEMA Standard* HGF Thickness 0.048" (1.22mm) 0.048" ± 0.005" (1.2mm ± 0.12mm) 0.048" ± 0.005" (1.2mm ± 0.12mm) Surface Wear Resistance (cycles) 700 400 (min.) 400 (min.) Boiling Water Resistance No effect No effect No effect High Temperature Resistance No effect Slight effect Slight effect Radiant Heat Resistance 150 seconds 125 sec. (min.) 75 seconds (min.) Stain Resistance Reagents 1-10 Reagents 11-15 No effect No effect No effect Moderate effect No effect Moderate effect Light Resistance Slight effect Slight effect Slight effect Dimensional Stability Machine Direction Cross Direction 0.3% 0.7% 0.5% max. 0.9% max. 0.5% max. 0.9% max. Impact Resistance 65" (1651mm) 50" (1270mm) 45" (1143mm) Cleanability (cycles) 10 20 (max.) 20 (max.) Appearance No ABC defects No ABC defects No ABC defects *Marker Board Laminate is not specifically covered in ANSI/NEMA LD3-2005 standards. However, the physical properties of this product conform closely to specifications listed in standards. Typical Fire Test Data Test data for Marker Board Fire-Rated Laminate are obtained by the Steiner Tunnel Test method of the American Society for Testing Materials (ASTM-E-84, Standard Testing Method for Surface Burning Characteristics of Building Materials). This procedure is cataloged by Underwriters Laboratories, Inc. as UL 723. Typical Flame Spread and Smoke Developed Properties Wilsonart Product Flame Spread Smoke Developed 136 65 115 Note: Independent test conducted on unsupported laminate. Model Code Designations used to determine flame spread classification Flame Spread Classification (Maximum Rating) International (IBC) Life Safety (NFPA 101) 25 A A 75 B B 200 C C (Reference: Architectural Woodwork Quality Standard, 8th Edition, Version 1.0 - 2003) All Model Codes regulate the generation of smoke by interior finish material. In all cases they specify a maximum smoke development rating of 450. Codes and Certifications: Code compliances have not yet been determined for finished installation of this state-of-the-art decorative laminate. You are urged to consult with product manufacturers and applicable code authorities in your choices of adhesive, substrate and design for end applications. General Standards Wilsonart Laminates conform to the voluntary standards of the American National Standards Institute/National Electrical Manufacturers Association (ANSI/NEMA) LD3-2005, for thickness, performance properties and appearance. Various grades of Wilsonart Laminates meet or exceed the International Standards Organization specifications as found in ISO 4586, titled, “High-Pressure Decorative Laminate (HPDL) - Sheets Based on Thermosetting Resins - Part I: Specifications.” The GREENGUARD Environmental Institute™ has awarded its GREENGUARD® Indoor Air Quality Certification to Wilsonart Laminate. All Wilsonart Laminate product types were tested under the stringent GREENGUARD Standards for low-emitting products. All GREENGUARD Indoor Air Quality Certified® products ensure minimal impact on the indoor environment. For a copy of the certificate, visit www.greenguard.org. Specific Product Standards U.S. Federal Specification L-P 508H, April 9, 1977, “Plastic Sheets, Laminated, Decorative and Nondecorative,” spells out criteria for decorative laminates for federal installations. 4. Installation: Fabrication and Assembly Recommendations Fabrication should follow approved methods. Assembled pieces should meet the specification of KCMA (Kitchen Cabinetmakers Manufacturers Association), ANSI A-161.2-1998 (revised), and “Architectural Woodwork Quality Standards, Guide Specifications and Quality Certification Program” guidelines of the Architectural Woodwork Institute where applicable. Wilsonart Marker Board Laminate must be bonded to a substrate of reliable quality, such as particleboard, medium density fiberboard or plywood with one A face. High-pressure laminate, plaster, concrete and gypsum board should not be considered suitable substrates. Marker Board Laminate may not be used as structural members. Bond with adhesives and follow the techniques recommended by the adhesive manufacturer. Recommended adhesives are permanent types, such as urea and polyvinyl acetate (PVA), and contact types. Wilsonart adhesives are recommended for most bonding conditions. To avoid stress cracking, do not use square-cut inside corners. All inside corners should have a minimum of 1/8” (3.175mm) radius and all edges should be routed smooth. Drill oversized holes for screws or bolts. Screws or bolts should be slightly countersunk into the face side of a laminate-clad substrate. Take care to ensure an appropriate acclimation between the laminate and the substrate prior to fabrication. The face and backing laminates and the substrate should be conditioned in the same environment for 48 hours before fabrication. Recommended conditioning temperature is about 75ºF (24ºC). Laminates should be conditioned at 45% to 55% relative humidity. Carbide-tipped saw and router blades should be used for cutting. High tool speed and low feed speed are advisable. Cutting blades should be kept sharp. Use a hold-down to prevent any vibration. NOTE: Marker Board Laminate is shipped without protective film. 5. Warranty Wilsonart International, Inc. (“Wilsonart”) warrants to the original consumer purchaser for one (1) year after date of purchase (“Warranty Period”) that, under normal use and service, Wilsonart® Laminate Sheets are free from manufacturing defects and conform to published specifications. This warranty applies only to a Wilsonart Laminate Sheet which has been installed in an interior application and remains installed at that location (“Warranted Product”) and is extended only to, and may be enforced only by, the original consumer purchaser. THIS WARRANTY IS NOT TRANSFERABLE. This warranty is expressly conditioned upon submission of proof of date of purchase. WHAT IS EXCLUDED: This warranty shall not apply to damage arising from any of the following: 1. Accidents, abuse or misuse; 2. Exposure to extreme temperature; 3. Improper fabrication or installation; or 4. Improper maintenance or repair. WHAT WILSONART WILL DO IF YOUR CLAIM IS COVERED BY THIS WARRANTY Wilsonart will provide, at no cost and with delivery prepaid, a Wilsonart® Laminate Sheet to replace the Warranted Product. Wilsonart will not pay for removal of the Warranted Product or for fabrication or installation of the replacement laminate or any other costs. No replacement under the warranty shall extend the Warranty Period. Any replacement is limited to colors and styles of Wilsonart® Laminate Sheets available at the time of replacement. Exact color matches may not be possible. If the original color or style is no longer available, Wilsonart has the right to substitute another Wilsonart Laminate Sheet of equal or greater value than the Warranted Product. WHAT YOU NEED TO DO To make a claim under this warranty, you must contact the Wilsonart Warranty Center at the address listed below before the end of the Warranty Period. You must provide proof of date of purchase, photographs of the Warranted Product and access for inspection for warranty determination by a Wilsonart representative, and thereafter Wilsonart will provide you a determination on your claim. Wilsonart Warranty Center 2400 Wilson Place Temple, Texas 76504 877-537-0533... Toll Free THE FOREGOING SHALL CONSTITUTE THE EXCLUSIVE REMEDY OF THE PURCHASER AND THE EXCLUSIVE LIABILITY OF WILSONART. THE ABOVE WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES WHETHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE PERIOD OF THE WRITTEN WARRANTY SET FORTH HEREIN. WILSONART SHALL NOT, UNDER ANY CIRCUMSTANCES OR UNDER ANY LEGAL THEORY, BE LIABLE TO THE PURCHASER OR ANY OTHER PERSON FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION DAMAGES TO, OR LOSS OF USE OF, PROPERTY, DAMAGES FOR LOSS OF PROFITS OR REVENUES OR ANY OTHER DAMAGES ARISING FROM THE PURCHASE. WILSONART'S LIABILITY WILL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE WILSONART® PRODUCT. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. No agent, dealer, employee or representative of Wilsonart nor any installer, fabricator or other person is authorized to modify the warranty in any respect. The invalidity of all or a part of any of the provisions of the Limited Warranty shall not affect or invalidate any other provision of the Limited Warranty. For further assistance or questions, contact Wilsonart at the address or telephone number listed above or at www.wilsonart.com. NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE, INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES SHALL WILSONART INTERNATIONAL, INC. BE LIABLE FOR ANY LOSS OR DAMAGE ARISING FROM THE PURCHASE, USE OR INABILITY TO USE THIS PRODUCT, OR FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES. NO FABRICATOR, INSTALLER, DEALER, AGENT OR EMPLOYEE OF WILSONART INTERNATIONAL, INC. HAS THE AUTHORITY TO MODIFY THE OBLIGATIONS OR LIMITATIONS OF THIS WARRANTY. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state; therefore, some of the limitations stated above may not apply to you. It is to your benefit to save your documentation upon purchase of a product. 6. Maintenance* Quartet® and Expo® Dry Erase , Expo® BrightSticks, Expo® Neon markers are recommended for Wilsonart Marker Board Laminate. Wilsonart Marker Board Laminate can be cleaned using a felt or multi-purpose board eraser. When additional cleaning is required, a soft cloth dampened with warm tap water and mild soaps, such as those used for hands or dishes, is recommended. If stubborn stains persist, Marker Board Laminate can be cleaned with spray-type glass cleaners, such as Windex®, 409® Formula All-Purpose Cleaner, Isopropyl Alcohol or Zep® Write-Away Grafitti & Ink Remover. Hard-to-remove stains can be treated with a 2-minute exposure to hypochlorite bleach, such as Clorox®, immediately followed by a clean water rinse. Various whiteboard cleaners and conditioners, such as Quartet, Expo, or Windex, available through local office supply stores, are excellent products for thorough cleaning. Remember to clean erasers often by wiping to remove dry-erase marker residue. DO NOT use cleansers that contain abrasives, acids, alkalis or paper towels, as they will damage the decorative surface. We recommend that you not allow any of the following reagents to remain in contact with the decorative surface: 1. Hypochlorite bleach, except as described above 2. Hydrogen peroxide solution 3. Mineral acids, hydrochloric acid, such as Lime-A-Way™, sulfuric or nitric acid 4. Caustic solutions containing greater than 2% lye, such as Drano® 5. Sodium bisulfate, such as Sani-Flush® 6. Potassium permanganate 7. Berry juices 8. Silver nitrate, in 1% concentration or greater 9. Gentian violet 10. Mild silver protein, such as 20% Argyrol 11. Bluing 12. Fabric dye, such as Tintex® or Rit® 13. Alcohol containing 1% iodine in solution If you require a decorative laminate that can withstand these and other chemicals, please refer to the Tech Data for Wilsonart® Chemsurf® Chemical-Resistant Laminates. Free copies of the “Care and Maintenance Guide,” which covers all Wilsonart products, are available. The guide can be accessed at http://www.wilsonartlaminate.com or by calling our hotline at: 800-433-3222. It can be used for your own information, for project manuals, and for provision to clients and contractors involved with interior construction and finishing. *Not applicable for Phenolic Laminate Backing Sheet. 7. Technical Services For samples, literature, questions or technical assistance, please contact our toll-free Hotline at (800) 433-3222, Monday through Friday, 7 am –7 pm, CST. Specification Form: Surface shall be Wilsonart® Marker Board Laminate, produced by Wilsonart International, Temple, Texas 76503-6110. Type: 136 Surface Pattern Number: __________ Pattern Name: __________ Finish Number: ___________ Name: ___________ Edge Trim Pattern Number: ___________ Pattern Name: ___________ Adhesive Name: ___________ Grade/Type: ___________ Brand: Wilsonart Adhesive Material shall equal or exceed performance standards set by the American National Standards Institute/National Electrical Manufacturers Association (ANSI/NEMA) LD3-2005 for high-pressure laminate. Fabrication shall comply with "Architectural Woodwork Quality Standards, Guide Specifications and Quality Certification Program" guidelines of the Architectural Woodwork Institute. MarkerBoard (TD1366) Revised: April 1, 2010 © 1998-2007, Wilsonart International, Inc. 8 1