Wilsonart® Type II PVA WaterResistant Assembly and Cold Press Adhesive  WA-TypeII

Wilsonart® Type II PVA WaterResistant Assembly and Cold Press Adhesive WA-TypeII Adhesive Countertops
 

Where To Buy

Commercial Buyers

Find your nearest Distributors

Homeowners

Find your nearest Dealers

Certifications: GREENGUARD® Certified
Cold Press Time: 30-60 minutes @40-50psi
Closed Time: 20 minutes
VOC Content: <20 g/L
Features: Type II Water Resistance
Compliance(s): "Ozone Transport Commission SCAQMD, Rule 1168"
Coverage (Bonded): ~229 sq.ft./gal at 7.0 wet mils
Open Time: 5 minutes
Qualifies for LEED® Credit(s): LEED®-NC & CI EQ Credit 3.2 LEED®-NC & CI EQ Credit 4.1 LEED®-NC & CI EQ Credit 4.4 LEED®-NC & CI EQ Credit 4.5
Solids Content: 49%±1%
Density: 9.1 lbs/gallon
Color: White (Type II)
Viscosity: 4900 cps (typical)
VHAP Content: <0.032 lbs/lbs solids
 
 
 

  • For joint assembly, fire doors and hot/cold press applications
  • WA Type II meets the requirements for D3 classification of European test method EN204 for interior applications and ANSI/HPVA HP-1-1004 water resistance
  • Consumer and professional use
  • Non-toxic and easy water clean-up
  • Excellent sandibility
  • Available size(s): 5-gallon pail, 55-gallon drum and 270-gallon tote (for smaller sizes see Lokweld® Type II Glue)

Features

  • Eco Credentials

    Eco Credentials

    Third-party certification available for this product. See Technical Specs & Certifications below.